Magikitchn CG User Manual download pdf (Page 4)

2 L25-007 Rev. 2

1. Hood Handle and Hood Bracket Assembly

The Handles (top illustration)

Each handle has two support rods and a center tube. To assemble the handles more easily, open each hood up and turn it upside

down on a large table. The ¾” long bolts from the handle hardware kit go in from the inside of the hood and fasten to a

support rod; point the support in the right direction and snug it up finger tight. Place the tubular handle onto the first

support and slip the second support into place. Hold the second support in position and install the other ¾’ long bolt

through the back of the hood and into the threaded hole in the second support and tighten it. Align the tubular handle and

the support rods in a straight line and tighten the mounting bolts securely with a #3 Phillips screwdriver. Repeat this

procedure for each of the handle sets to be installed. It is important to install all the handles for the hood so it can be easily

removed if it is hot.

The Hood Mounting Brackets (bottom illustration)

All single hoods require a pair of outer brackets. Units with twin hoods also require a pair of center brackets. Each type has a

left and right hand mate. All the brackets mount with ¾” long bolts that mate with threaded fasteners built into the frame

of the broiler grills. The instructions and illustrations for every combination of hood option can be found in this manual.

4001-0963400

SCREW, 1/4-20 x 3/4”, INT. LOCKWASHER

(PART OF 7299-1257300 HDWE KIT)

5602-1190600

HOOD, HANDLE SUPPORT ROD

5602-1190500

HOOD, HANDLE TUBULAR

5402-1187701

5402-1187702

HOOD, BRACKET CENTER LEFT/RIGHT

HOOD, BRACKET OUTER LEFT

HOO

D, BRACKET OUTER RIGHT

5402-1188002, RIGHT

5402-1188001, LEFT

CRADLE

10545C2.DWG

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Magikitchn CG User Manual Page 4